Serie RVS · Only cooling Serie RVS ... H · Cooling and heating
Environment-friendly due to water as the energy source
In the pipelines between the chiller and the inside devices, water flows as a cooling or a heating medium. In comparison with conventional systems, there are no refrigerants in the rooms being air-conditioned. Refrigerant is required only in the closed circuit of the chiller, and up to 80% less than in the case of conventional refrigerant systems, thanks to state-of-the-art technology.
Easy installation
REMKO chillers with a hydronics part are delivered ready for installation. The reservoir, expansion vessel, circulation pump, and microprocessor regulator have already been installed. In case of devices with a hydronics part, local plant requirements can be excellently adapted. The medium connections are standardised. Installation is possible quickly and easily outdoors, on the roof, or in well-ventilated rooms such as cellars, garages, utility rooms, attics, and so on.
Special installation knowledge is not required.
Chiller with heating pump function RVS H
With a wattage between 2.6 and 7.1 kW, heating capacities between 6.5 and 17.5 kW can be achieved, depending on the outside temperature. Use the free ambient heat of the air for the heating operation of your RVS air-conditioning systems. Even in case of frigid outside temperatures around 0°C, the devices provide flow temperatures of up to 50°C.
Function
A hermetically closed cooling circuit with environment-friendly refrigerant provides for the temperature control of the medium flow. A circulating pump continuously delivers the cooled or heated medium to the inside devices. The built-in reservoir makes sure that the compressor does not start up every time the inside devices require cooling or heating output. In contrast with standard air-conditioning systems, it treats the compressor with care and increases the service life.
High performance, cooling output between 5.8 and 140.2 kW
Weather-resistant stainless steel housing
Complete equipment, ready for installation with reservoir, expansion vessel, and circulating pump
Chiller without hydronics part from RVS 5300 INOX for adaptation to plant requirements
With winter regulation for operation from +45°C to -10°C in the standard design
Compact design
With protective grille in the standard design
Low-noise device design with infinitely variable output adaptation of the fans
Microprocessor-control regulator with display of actual operating values
Automatic monitoring of the phase sequence
High operating safety due to permanent monitoring of all relevant parameters
