Hot water heating system PWB 50
REMKO PWB SERIES Hot water heating systems
REMKO PWB SERIES Hot water heaters
The sensible addition to stationary and mobile hot water heating systems
The portable hot water heater PWB 50 with heating register and an output of 50 kW is operated in combination with a hot water heating system. Ideal for the heating of construction sites, halls, or tents. These structures are provided with heat in a cost-saving, flexible manner. The equipment works in recirculation-air operation. A further advantage is the power supply with 230 V.
- Maintenance-free, noise-optimised 230V sickle-shaped axial fan and protective grid
- Dust filter plug-in module
- Individually adjustable air discharge fins
- Heat exchanger made of round copper tubes and pressed-on aluminium fins
- Collecting and heating medium connection made of steel
- Adjustable room thermostat 0-40°C with 3 m connecting cable and Schuko plug mounted to the device
- Robust chassis and perimeter protective/transport bracket
PWB 50 with water connection set
Technical data
| Variant | PWB 50 |
|---|---|
| Heating capacity at 90/70 and 0°C air intake | +45 / - kW |
| Heating capacity at 60/50 and 0°C air intake | +34.5 / - |
| Heating medium | Up to max. 110 |
| Max. operating pressure | 16 bar |
| Power supply | 230/1~/50 |
| Max. power consumption | 0.5 kW |
| Nominal current consumption max. | 2.3 A |
| Dimensions H/W/D | 745/570/865 mm |
Accessories / Spare parts
Downloads
Pictures 
REMKO PWB 50 jpg, 266,281,000.0
Heat requirement chart for heating systems
The diagram allows you to quickly determine the necessary heating power requirements of the hot air heating system to be used. It is based on a rough heat demand estimate for factories and similar buildings.
Heat requirement chart Determination of the necessary heating output
