WKF-compact Mannheim - Bild 28438 WKF-compact Mannheim - Bild 27275 WKF-compact Mannheim - Bild 27276 WKF-compact Mannheim - Bild 27273 WKF-compact Mannheim - Bild 27274 WKF-compact Mannheim - Bild 27272 WKF-compact Mannheim - Bild 27271

REMKO WKF-compact Mannheim

Variant EDV-Nr. Area of use: heating
WKF 70 compact 254110 2-7 kW
WKF 120 compact 256030 7-12 kW
WKF 180 compact 256035 12-18 kW

Variant

Heat pump package type Mannheim

This heat pump package is designed for users who would like to operate the heat pump in combination with a conventional heat generator (bivalently alternating). The additional KPS 300 buffer tank is used for the hydraulic decoupling of large volume flow rates. A cooling function for the summer can also be activated, if necessary. In this package, the domestic water preparation takes place in the 300-litre domestic water tank integrated into the indoor unit. Through the compact design, installation expenses are extremely low.

Package consisting of:

  • Indoor unit with integrated 300 litre WKT 300 domestic water tank
    (BEVB 1,19 kWh/day)
  • Outdoor unit
  • Condensate drip tray for outdoor unit with oil separator
  • Buffer tank for cooling and heating water KPS 300 (300 litres)
  • Immersion probe

Hydraulic system diagram of Mannheim Example for monoenergetic or alternative bivalent operation


Technical data

Variant WKF 70 compact WKF 120 compact WKF 180 compact
area of use 2-7 kW 7-12 kW 12 - 18 kW
function Heizen/Kühlen/WW Heizen/Kühlen/WW Heizen/Kühlen/WW
Storage tank for hydraulic decoupling of volumetric flows extern 300 l extern 300 l extern 300 l
DHW storage tank 300 l 300 l 300 l
Heating capacity min - max 6,0 (0,9 - 6,0) kW 10,0 (2,5 - 12,5) kW 14,0 (3,1 - 17,7) kW
Rated heating output 6,0 kW 10,0 kW 14,0 kW
Energy efficiency rating heating A++ A+ A++
Cooling capacity min./max. 5,0 (1,1 - 8,9) kW 6,0 (3,3 - 11,9) kW 11,0 (5,5 - 14,0) kW

Accessories / Spare parts

Variant
Connecting line

Connecting line EDV-Nr.: 260010

between outdoor and indoor unit

Floor bracket

Floor bracket EDV-Nr.: 260023

Robust floor bracket made of reinforced of rubber with high intrinsic weight and good damping properties. For heat pump outdoor unit series WKF. Length 0.6m and/or 1m WKF 70-180, WKF 120-180 Duo (2x)

Wall brackets

Wall brackets EDV-Nr.: 260079

For mounting to suitable faces and masonry, including vibration dampers

Electrical condensation drainage – heating

Electrical condensation drainage – heating EDV-Nr.: 260045

Electrical condensate drainage heating, temperature-regulated for the safe discharge of defrost water with outside temperatures below the freezing point.

Condensate drip tray including oil separator

Condensate drip tray including oil separator EDV-Nr.: 260135

Condensate drip tray made of aluminium for each outdoor unit, including temperature-controlled electronic condensate drip tray heating, leaf guard grating, and oil separator. According to § 62, Abs.1, WHG (Wasserhaushaltsgesetz (German Water Resources Act).

REMKO Smart-Control remote control

REMKO Smart-Control remote control EDV-Nr.: 248105

With the cabled remote control, all functions of the heat pump and heating circuits can be set. A room temperature controlled regulation of the heating circuits (FBH or heaters) can be realised. In addition, dew point regulation is possible using the integrated humidity probe.

Returnmonolayer-SET for

Returnmonolayer-SET for EDV-Nr.: 259030

HPS 500

Return flow layering set RES

Return flow layering set RES EDV-Nr.: 259031

For EFS 25 for connection to the buffer tank RES including tank connection pipes and 3-way switchover valve for temperature-dependent layering in the buffer tank. Note: Not suited for EFS 35/50

Return flow layering set RES

Return flow layering set RES EDV-Nr.: 259032

For EFS 25 for connection to the buffer tank RES including tank connection pipes and 3-way switchover valve for temperature-dependent layering in the buffer tank. Note: Not suited for EFS 35/50

Tank connection set for buffer tanks

Tank connection set for buffer tanks EDV-Nr.: 259040

For the direct connection of the fresh water station EFS 25 to the buffer tank. Note: Not suited for EFS 35/50

Tank connection set for buffer tanks

Tank connection set for buffer tanks EDV-Nr.: 259041

For the direct connection of the fresh water station EFS 25 to the buffer tank. Note: Not suited for EFS 35/50

Tank connection set for buffer tanks

Tank connection set for buffer tanks EDV-Nr.: 259042

For the direct connection of the fresh water station EFS 25 to the buffer tank. Note: Not suited for EFS 35/50

Circulation pump EFS 25

Circulation pump EFS 25 EDV-Nr.: 259052

Controllable high-efficiency circulation pump including pipe subassembly for direct connection to EFS 25

Pulse generator, circulation

Pulse generator, circulation EDV-Nr.: 259045

Pulse generator for the realisation of a pulse-controlled circulation pump via REMKO Smart-Control.

Freshwater station EFS 25

Freshwater station EFS 25 EDV-Nr.: 260155

Heating circuit pump set HGU

Heating circuit pump set HGU EDV-Nr.: 259037

vers. 2

3-way changeover valve

3-way changeover valve EDV-Nr.: 260072

Electrical switching valve / 3-way valve for domestic water preparation and separate cooling circuit (four-pipe system).

Sound insulation set

Sound insulation set EDV-Nr.: 1613900

Sound insulation set

Overflow protection valve

Overflow protection valve EDV-Nr.: 260080

Overflow protection valve 1" for ensuring that the minimum medium flow rate is maintained.

Contact probe

Contact probe EDV-Nr.: 259060

Contact probe Pt1000 for the integrating a temperature-guided circulation pump via Smart Control, A heating circuit with mixer (2 pieces required)

Heating circuit pump set HGM

Heating circuit pump set HGM EDV-Nr.: 259038

vers. 2

Immersion probe

Immersion probe EDV-Nr.: 259062

Immersion probe Pt 1000 for integrating, Solar reference probe for buffer tank, Domestic water tank EWS 300, General buffer probe

Collector sensor

Collector sensor EDV-Nr.: 260102

Immersion probe Pt 1000 for the integration of solar thermal systems

buffer memory HPS 500

buffer memory HPS 500 EDV-Nr.: 270300

Buffer tanks for heating water

Buffer tanks for heating water

Buffer tanks for heating water EDV-Nr.: 270380

Stratified storage

Buffer tanks for heating water

Buffer tanks for heating water EDV-Nr.: 270400

Stratified storage

buffer memory KPS 300 for

buffer memory KPS 300 for EDV-Nr.: 270250

Hot/cold water buffer tank

Floor bracket

Floor bracket EDV-Nr.: 260024

Robust floor bracket made of reinforced of rubber with high intrinsic weight and good damping properties. For heat pump outdoor unit series WKF. Length 0.6m and/or 1m WKF 70-180, WKF 120-180 Duo (2x)

Electrical auxiliary heater 6 kW

Electrical auxiliary heater 6 kW EDV-Nr.: 260063

For KPS/MPS/HPS buffer tank. Electrical auxiliary heater 6/4" for installation in a buffer tank. Including temperature regulator and safety temperature limiter. 2, 4 or 6 kW can be optionally connected. Note: Not suited for domestic water tank.

Flange heating

Flange heating EDV-Nr.: 260175

for EWS 300

Fin-tube heat exchanger

Fin-tube heat exchanger EDV-Nr.: 260200

For additional indirect heating, e.g. with a solar thermal system

Fin-tube heat exchanger

Fin-tube heat exchanger EDV-Nr.: 260210

For additional indirect heating, e.g. with a solar thermal system

REMKO Smart-Count

REMKO Smart-Count EDV-Nr.: 259010

heat meter, installed

REMKO Smart-BVT Rohrbaugruppe

REMKO Smart-BVT Rohrbaugruppe EDV-Nr.: 254050

WKF 70 compact, eingebaut

REMKO Smart-Serv Heizstab 9 kW

REMKO Smart-Serv Heizstab 9 kW EDV-Nr.: 254059

400V WKF 70 compact eingebaut

Technical appliance handover

Technical appliance handover EDV-Nr.: 1880

WKF/HTS

Technical appliance handover

Technical appliance handover EDV-Nr.: 1881

WKF/HTS Belgien/Österreich

REMKO Smart-Web

REMKO Smart-Web EDV-Nr.: 248120

Ethernet interface for the connection of commercial home router software. For dialling in to Smart-Control. Setting and reading operating parameters using a smartphone, tablet PC, laptop, etc.

REMKO Smart-Com

REMKO Smart-Com EDV-Nr.: 254090

Additional software for the integration of the heat pump into a Smart Home system such as KNX via the Ethernet interface of Smart Control, including the heat meter installed at the factory (Smart Count)

BVT set, loose

BVT set, loose EDV-Nr.: 260081

For the external integration of a 2 WE with a larger heating capacity. Consisting of: 3-way valve 5/4", overflow valve 1"

Sludge separator

Sludge separator EDV-Nr.: 260803

For the filtration of contamination and corrosion products from the heating water, glycol-resistant and insulated

Sludge separator

Sludge separator EDV-Nr.: 260804

For the filtration of contamination and corrosion products from the heating water, glycol-resistant and insulated

Pipe bushing for WKF series

Pipe bushing for WKF series EDV-Nr.: 259061

Robust EPDM seal for watertight sealing of the refrigerant and electrical lines. Ø 100 mm

External dew point monitor

External dew point monitor EDV-Nr.: 259070

Dew point monitoring is installed for additional security to prevent the occurrence of humidity. The humidity is checked directly on the corresponding surfaces. It is possible to connect up to 5 measuring probes.

Additional contact probe

Additional contact probe EDV-Nr.: 259071

Additional contact probe

Flow sensor for dynamic hygiene function

Flow sensor for dynamic hygiene function EDV-Nr.: 254070

Flow sensor with frequency output for recording the cold water volume flow rate in the domestic water tank. Regulation according to DIN 1988-200

Flow sensor for dynamic hygiene function

Flow sensor for dynamic hygiene function EDV-Nr.: 254080

Flow sensor with frequency output for recording the cold water volume flow rate in the domestic water tank. Regulation according to DIN 1988-200

Dual-direction power meter

Dual-direction power meter EDV-Nr.: 259065

Current meter for Smart Heating/Cooling function, PV integration. 400V/3~/50Hz with S0 interface

Full heating protection

Full heating protection EDV-Nr.: 260819

Corrosion protection and hardness stabilisation for conventional hot water heating systems, without anti-freeze 1 l

Full heating protection

Full heating protection EDV-Nr.: 260807

Corrosion protection and hardness stabilisation for conventional hot water heating systems, with anti-freeze 20 l

Electrical auxiliary heater 6 kW

Electrical auxiliary heater 6 kW EDV-Nr.: 260063

For KPS/MPS/HPS buffer tank. Electrical auxiliary heater 6/4" for installation in a buffer tank. Including temperature regulator and safety temperature limiter. 2, 4 or 6 kW can be optionally connected. Note: Not suited for domestic water tank.

Fin-tube heat exchanger

Fin-tube heat exchanger EDV-Nr.: 260200

For additional indirect heating, e.g. with a solar thermal system

Front panel / cover WKF/WKT EDV-Nr.: 1120901
1
cover WKF/WKT EDV-Nr.: 1120902
2
switchbox WKF/WKT EDV-Nr.: 1120915
3
I/O module SMT WKF/WKT EDV-Nr.: 1120650
4
Control panel EDV-Nr.: 248100
5
Plate heat exchangers EDV-Nr.: 1120940-1
6
Safety assembly EDV-Nr.: 1120010
7
Bypass valve actuator EDV-Nr.: 1120913
8
Valve body pass valve EDV-Nr.: 1120913-1
9
Elektrical booster heating EDV-Nr.: 260066
10
Actuator 3-way valve EDV-Nr.: 1120912-3
11
Valve body 3-way valve EDV-Nr.: 1120912-2
12
Vortex Flow Sensor EDV-Nr.: 1120914
13
circulating pump EDV-Nr.: 1121304
14
Actuator 3-way valve EDV-Nr.: 1120912-3
15
Valve body 3-way valve EDV-Nr.: 1120912-2
16
Series terminal EDV-Nr.: 1120922
17
Pipe support block group EDV-Nr.: 1120904
18
circuit board ComKit RS485 EDV-Nr.: 1120999
19
Drain valve WKF/WKT EDV-Nr.: 1120905
20
Bleeder 1/4" EDV-Nr.: 1120059
21
Harness EDV-Nr.: 1121055
Cable Set for PCB EDV-Nr.: 1120309
Micro-SD-Card EDV-Nr.: 1120985-1
Coding resistance 51 Ohm EDV-Nr.: 1121089
Temperature sensor EDV-Nr.: 1120930
transformer internal module EDV-Nr.: 1120935
Heating assembly 9 KW with EDV-Nr.: 1120942
Compressor EDV-Nr.: 1121064
1
Fin evaporator EDV-Nr.: 1121065
2
4-way-valve EDV-Nr.: 1121066
3
blocking valve EDV-Nr.: 1120313
4
Fan blade EDV-Nr.: 1121067
5
Cover plate EDV-Nr.: 1121068
6
Side panel EDV-Nr.: 1121069
7
side panel RAL Pos. 5 EDV-Nr.: 1121070
8
side panel RAL Pos. 5 EDV-Nr.: 1121071
9
Display cover EDV-Nr.: 1121072
10
Side panel EDV-Nr.: 1121073
11
screen-cond bar EDV-Nr.: 1121074
12
Mopunting plate EDV-Nr.: 1121075
13
Fan motor EDV-Nr.: 1121076
14
Probe evaporator EDV-Nr.: 1121077
15
assy-valve expansion EDV-Nr.: 1121078
16
Motherboard with display EDV-Nr.: 1121079
17
Inverter PCB EDV-Nr.: 1121080
18
Noise filter F1 / F2 EDV-Nr.: 1121081
19
Thottle EDV-Nr.: 1121082
20
cover WKF/WKT EDV-Nr.: 1120902-2
2
Base plate EDV-Nr.: 1120903
3
Side panel storage WKT EDV-Nr.: 1120906
4
drinking water storage WKT 300 EDV-Nr.: 270500
20
Front panel storage EDV-Nr.: 1120606
25
Rod anode EDV-Nr.: 1120230
26
Chain anode EDV-Nr.: 1120121
27
Gasket flange EDV-Nr.: 1120119
1

Downloads

Variant
Language
Pictures
WKF 70 IM jpg, 0.2 MB
REMKO WKF 70 compact AM jpg, 1.1 MB
REMKO WKT 300 jpg, 0.6 MB
Kondensat-Auffangwanne inkl. Ölabscheider jpg, 0.1 MB
Pufferspeicher KPS 300 jpg, 0.1 MB
Assembly drawings
WKF 70 IM jpg, 0.1 MB
REMKO WKF 70 compact AM jpg, 0.1 MB

Hydraulic configurator Hydraulic schemes for heat pumps

Hydraulic configurator

Heat pump configurator The way to the right heat pump

Heat pump configurator