The sophisticated design is suitable for both wall and ceiling installation. With a heat output of 4 to 135 kW, an optimum expansion of existing or planned hot water heating systems is possible at any time. The load-bearing, galvanised, solid steel sheet housings are already supplied. The air discharge fins are individually infinitely variable. A particularly efficient and single-phase Ziehl-Abegg EC fan is installed as standard.

Fitted as standard with a Ziehl-Abegg EC fan
Speed regulation 0-10V
Low spatial requirements
Extremely low noise by using optimum coordinated components
Extremely easy to service
Painted design, optional

Injection vent An economic extension

The supply air is optimally injected via the injection vent; the position of the air deflection vent influences the air velocity and the outlet temperature of the total air flow. With this technology, these PWW devices achieve larger penetration distances and faster heating of the warehouses to be climatized. The suction of the already heated room air results in the fact that different climatized air layers cannot rise. It creates uniformly distributed heating of the room.

The subsequent installation of the injection vent on your device is possible without difficulty and without much effort. The slat position can be controlled electrically via an optional control.

Technical data

Variant	PWW 30- EC	PWW 30-3 EC	PWW 30-4 EC	PWW 30-6 EC	PWW 50-2 EC	PWW 50-3 EC	PWW 50-4 EC	PWW 50-6 EC	PWW 80-2 EC	PWW 80-3 EC	PWW 80-4 EC	PWW 80-6 EC	PWW 100-2 EC	PWW 100-3 EC	PWW 100-4 EC
Heating capacity at 70/50 and 15°C air intake	+8.9 / - kW	+10.9 / - kW	+12.4 / - kW	+15.1 / - kW	+17.3 / - kW	+19.7 / - kW	+24.6 / - kW	+25.4 / - kW	+32.3 / - kW	+36.7 / - kW	+44.2 / - kW	+35 / - kW	+43.5 / - kW	+49.7 / - kW	+59.7 / - kW
Heating capacity at 55/45 and 15°C air intake	+7.4 / - kW	+9 / - kW	+10.1 / - kW	+11.9 / - kW	+14.3 / - kW	+16.1 / - kW	+19.4 / - kW	+20.9 / - kW	+26.3 / - kW	+29.4 / - kW	+36.4 / - kW	+28.6 / - kW	+35.2 / - kW	+39.7 / - kW	+46.6 / - kW
Throw	18 m	15 m	12 m	12 m	20 m	17 m	16 m	32 m	26 m	22 m	21 m	35 m	29 m	25 m	24 m
Max. operating pressure	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar	16 bar
Power supply	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50	230/1~/50
Max. power consumption	0.12 kW	0.12 kW	0.12 kW	0.12 kW	0.19 kW	0.19 kW	0.19 kW	0.36 kW	0.36 kW	0.36 kW	0.36 kW	0.41 kW	0.41 kW	0.41 kW	0.41 kW
Nominal current consumption max.	1.25 A	1.25 A	1.25 A	1.25 A	1.43 A	1.43 A	1.43 A	1.43 A	1.43 A	1.43 A	1.43 A	2.34 A	2.34 A	2.34 A	2.34 A
Sound pressure level at 1m distance	+52 to - dB(A)	+51 to - dB(A)	+50 to - dB(A)	+50 to - dB(A)	+62 to - dB(A)	+61 to - dB(A)	+60 to - dB(A)	+59 to - dB(A)	+58 to - dB(A)	+57 to - dB(A)	+57 to - dB(A)	+62 to - dB(A)	+61 to - dB(A)	+60 to - dB(A)	+59 to - dB(A)
Dimensions H/W/D	440/560/403 mm	440/560/403 mm	440/560/403 mm	440/560/403 mm	515/640/406 mm	515/640/406 mm	515/640/406 mm	630/800/412 mm	630/800/412 mm	630/800/412 mm	630/800/412 mm	740/880/452 mm	740/880/452 mm	740/880/452 mm	740/880/452 mm

Accessories / Spare parts

Downloads

Declarations of conformity

PWW30-2EC

pdfEN

Pictures

REMKO PWW 30-2 EC, verzinkt, jpg, 3,247,107,000.0

Heat requirement chart for heating systems

The diagram allows you to quickly determine the necessary heating power requirements of the hot air heating system to be used. It is based on a rough heat demand estimate for factories and similar buildings.

Heat requirement chart Determination of the necessary heating output

more information