Outdoor unit Designline CAMURA
Outdoor unit Designline ALU
Outdoor unit Designline GRAPHIT
REMKO LWM SERIES Air/water system for heating and cooling
REMKO LWM SERIES
Monobloc heat pump for easy assembly outdoors
Compact, quiet to operate and easy to install – these properties characterize the LWM air/water heat pump in a monoblock design. The inverter technology fulfils all demands on high efficiency. Since the complete refrigeration circuit is located outdoors, absolutely no refrigeration system work is required during installation. This reduces the work effort and guarantees the largest possible assembly and function safety. Thanks to the newest refrigerant 454B, a water temperature of up to 65°C is achieved and maximum efficiency is guaranteed.
Due to the quiet operation, this heat pump can be used in almost all residential areas. The cooling function integrated in the standard version guarantees a pleasant room climate even in summer. Depending on the respective environment, the LWM heat pump is available in different design variants.
Profit from these advantages
- High inlet temperatures up to 65 °C
- Effective heating, preparation for domestic water and active cooling possible
- Remote access possible through the REMKO Smart Web Portal
- SmartServ 7.5 kW for monoenergetic operation, screed drying and hygiene operation
- Integrated solar control
- Optimised use of photovoltaic current - Smart Heating / Cooling
- Control of two mixed and one non-mixed heating circuits
- Smart-Control Touch
Use in the Smart-Grid intelligent power mains is also possible - Especially noise-insulated scroll condenser in outdoor unit
- Integrated power-controlled circulation pumps with EC technology for the supply of the heating system
- Dew point control with room temperature/moisture sensor possible
- Hermetically sealed refrigeration cycle
- Cascade circuit for Duo heat pumps
Scope of supply
- Monobloc heat pump
- 1 highly efficient, controlled heating circuit pump
- Dirt filter
- 2 shut-off valves
- Safety assembly with SIV, automatic bleeding valve and pressure gauge
- Outdoor probe/immersion probe
Technical data
| Variant | LWM 80 ALU LWM 80 GRAPHIT LWM 80 CAMURA | LWM 110 ALU LWM 110 GRAPHIT LWM 110 CAMURA | LWM 150 ALU LWM 150 GRAPHIT LWM 150 CAMURA | LWM 110 Duo ALU LWM 110 Duo GRAPHIT LWM 110 Duo CAMURA | LWM 150 Duo ALU LWM 150 Duo GRAPHIT LWM 150 Duo CAMURA |
|---|---|---|---|---|---|
| Version | Monoblock | Monoblock | Monoblock | Monoblock cascade | Monoblock cascade |
| System | Air/water | Air/water | Air/water | Air/water | Air/water |
| Operating mode | Heating/cooling | Heating/cooling | Heating/cooling | Heating/cooling | Heating/cooling |
| Testing | EHPA | EHPA | EHPA | EHPA | EHPA |
| Inverter technology | Series | Series | Series | Series | Series |
| Preparation for domestic water | Series | Series | Series | Series | Series |
| Number of outdoor/indoor units | 1 / - | 1 / - | 1 / - | 2 / - | 2 / - |
| Application limit, heating | -23 to +37 °C | -23 to +37 °C | -23 to +37 °C | -23 to +37 °C | -23 to +37 °C |
| Nominal heating capacity | 6.00 | 8.00 | 10.00 | 16.00 | 20.00 |
| Heating capacity/COP for A7/W35 | 6.25 kW/ 5.10 | 8.04 kW/ 5.02 | 10.29 kW/ 5.03 | 16.08 kW/ 5.02 | 20.58 kW/ 5.03 |
| Heating capacity/COP for A2/W35 | 4.33 kW/ 4.09 | 6.35 kW/ 4.04 | 8.33 kW/ 4.11 | 12.70 kW/ 4.04 | 16.66 kW/ 4.11 |
| Cooling capacity/EER for A35/W7 | 4.9 kW/ 2.81 | 7.63 kW/ 2.73 | 12.2 kW/ 2.65 | 15.26 kW/ 2.73 | 24.4 kW/ 2.65 |
| Cooling capacity/EER for A35/W18 | 5.8 kW/ 3.92 | 10.71 kW/ 4 | 18.2 kW/ 4.11 | 21.42 kW/ 4 | 36.4 kW/ 4.11 |
| Refrigerant | R454B | R454B | R454B | R454B | R454B |
| Basic refrigerant filling volume | 1.1 kg | 1.3 kg | 1.8 kg | 2x 1.3 kg | 2x 1.6 kg |
| Power supply outdoor unit | 230/1~/50 | 400/3~/50 | 400/3~/50 | 2x 400/3~/50 | 2x 400/3~/50 |
| Voltage supply for electrical heating element | 400/3~/50 | 400/3~/50 | 400/3~/50 | 2x 400/3~/50 | 2x 400/3~/50 |
| Nominal power consumption heating for A7/W35 | 1.22 kW | 1.6 kW | 2.04 kW | 2x1.6 kW | 2x2.04 kW |
| Nominal current consumption heating for A7/W35 | 5.3 A | 2.57 A | 3.27 A | 2x2.57 A | 2x3.27 A |
| On-site fuse protection outdoor unit/indoor unit | 16 | 3x 16 | 3x 16 | 2x 3x 16 | 2x 3x 16 |
| External maximum pressure loss, heating system | 60 / - kPa | 50 / - kPa | 40 / - kPa | 70 / - kPa | 60 / - kPa |
| Hydraulic connection supply/return flow | 1 1/4 | 1 1/4 | 1 1/4 | 1 1/4 | 1 1/4 |
| Sound power level indoor unit/outdoor unit | - / 54 dB(A) | - / 56 dB(A) | - / 58 dB(A) | - / 56 dB(A) | - / 58 dB(A) |
| Dimensions outdoor unit H/W/D | 1600/1000/800 mm | 1600/1000/800 mm | 1600/1000/800 mm | 1600/1000/800 mm | 1600/1000/800 mm |
Accessories / Spare parts
Downloads
Pictures 
REMKO LWM 80 Alu jpg, 146,511,000.0
LWM 80 Alu jpg, 146,511,000.0
Smart-Control Touch, Aufputz jpg, 73,248,000.0
Smart-Control Touch, Aufputz jpg, 317,705,000.0
Zubehör Set Smart-WP/ LWM jpg, 1,743,151,000.0
Schwingungsdämpfer (Satz) jpg, 1,898,715,000.0